Skip to main content
+39 328 8858149

Con il nuovo firmware V 02.00.0090
novità anche per il DJI Cendence

DJI Cendence

Novità in arrivo anche per il radiocomando professionale DJI Cendence che con il nuovo firmware ha una migliore gestione dell'antenna patch ed una ottimizzazione di alcuni controlli.


  • Date: 2018. 04.18
  • Firmware Version: V 02.00.0090
  • DJI GO 4 App: V 4.2.8
  • DJI Pilot Beta: V 0.5.1

What's New?

  • Added patch antenna detection. When connected, the Cendence LCD screen will always display “Patch antenna connected.” When disconnected, the LCD will display “Patch antenna not detected” for a short time (approx. 10 seconds). Cendence will emit a sound at the moment of patch antenna connecting and disconnecting.
  • Optimized the Focus Adjustment Knob (TD) control to fix an issue where focus adjustment range would be limited when used with some types of lens.
  • Optimized control over adjusting the camera exposure parameters. Rotate the dial clockwise to increase the exposure and counter-clockwise to decrease it.
  • Fixed an issue where the right dial would not set the camera parameters when using the Inspire 2 standard remote controller as the slave controller and Cendence as the master controller.
  • Fixed an issue where the LCD would display “System error” when Cendence had a low battery level.
  • If using the Inspire 2 standard remote controller as the slave controller, it must have firmware version v1.1.0010 or later.